High density analog input module with sensor power supply and a mix of direct power outputs.
Inputs
20
Outputs
8
Current
5A PWM output
CAN
3 plus 4 other comm ports
Product Specifications
Hardware
Overview
16-bit HCS12X Microcontroller running at up to 50 MHz
MCU
S12XEQ512
Flash
512 KB
RAM
32 KB
interfaces
CAN
2x J1939 CAN ports
Mechanical
Housing Material
PA66 GF15Nylon 66 / 15% Glass Fibers)
Installation
Panel mount
Connectors
DT06-12SA DT06-12SB DT06-12SC DT06-12SD W12S (wedge) – one per connector required 0462-201-16141 16AWG sockets 114017 Sealing Plugs – Unused pins are required to be sealed to maintain module sealing
Dimensions
6.29″ x 7.912″ x 2.14″
weight
~1.35 lbs
contacts
16-18 AWG: 0462-201-16141
14-16 AWG: 0462-209-16141
Plugs
Non-locking: 114017Locking: 0413-217-1605
Wire Size
14-16 AWG or 16-18 AWG
Mounting & Torque
1/4″ or M6 Fastener62-88 in-lb
Indicators
1x Green Power1x Red Status
Electrical
Operating Voltage
8-32VDC
Key Switch
Yes
Max I/O Available
20/8
Inputs
10x Inputs software configurable as switch to battery, switch to ground or 12-bit analog (0-5.5VDC). 4x Inputs software configurable as switch to battery, switch to ground or 12-bit analog (0-11.0VDC). 4x Inputs software configurable as switch to battery, switch to ground, 12-bit analog (0-5.5VDC) or RTD (1K ohm)2x Inputs software configurable as switch to battery, switch to ground, 12-bit analog (0-5.5VDC), frequency, PWM or Quadrature EncoderFrequency max is 10KHz at 50% duty cycle
Outputs
8x 2A PWM outputs with estimated current feedback or 2.5A digital outputs (software configurable as PWM or Digital)
